Scanner Access Now Easy (sane)
Questions tagged [sane]
129 questions
49
votes
16 answers
After Upgrade to Ubuntu 20.04: "Oh no! Something went wrong"
I upgraded to Ubuntu 20.04 today, choosing LightDM over gdm3 during the upgrade. During the upgrade I was asked if I wanted to keep or replace /etc/sane.d/dll.conf file. I decided for keeping it.
Now, without actively rebooting, the "Oh no!…
ema
- 775
22
votes
2 answers
Scanner detected with sane-find-scanner, but not with scanimage -L or sudo scanimage -L
I have a Fujitsu ScanSnap S1300i. I compiled SANE from source. When I run sane-find-scanner, the following output is given:
sane-find-scanner will now attempt to detect your scanner.
If the result is different from what you expected, first make…
Zach Latta
- 565
19
votes
0 answers
Fujitsu S1300i advances document but doesn't scan
I'm using a Fujitsu ScanSnap S1300i.
Using sudo as a temporary workaround to minimise any permissions problems:
$ sudo sane-find-scanner
found USB scanner (vendor=0x04c5 [FUJITSU], product=0x128d [ScanSnap S1300i]) at libusb:001:004
So I edited…
Ian
- 191
16
votes
4 answers
Install Canon LiDE 300 / 400 on Ubuntu 18.04
Unable to install Canon LiDE 300 on Ubuntu 18.04. How to solve it?
indranil
- 161
11
votes
4 answers
Epson scanner under Ubuntu 20.04
I mean to install scanner Epson 3170 Photo under Ubuntu 20.04.
I post at the bottom the (usual) installation steps I took prior to checking if my PC finds the scanner.
Then, sane-find-scanner found the scanner
$ sudo sane-find-scanner
#…
10
votes
4 answers
How to get a Brother DCP-350C scanner working?
Downloaded and installed the linux drivers from the Brother site here.
But the scanner still wasn't recognised.
You can see here, the drivers installed successfully:
$ dpkg -l | grep Brother
ii brother-cups-wrapper-common …
markling
- 593
9
votes
2 answers
Simple Scan cannot find scanner
Output of lsusb and sane-find-scanner below:
janos@AndrasXubuntu:~/Desktop$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is…
Janos
- 971
8
votes
5 answers
HP LaserJet AllInOne, scan does not work
If I try to scan (xsane or simple-scan) I get this output:
Device URI: hpaio:/net/HP_LaserJet_MFP_M129-M134?hostname=hp-drucker
I was told that this device has great linux support ... See…
guettli
- 1,765
7
votes
2 answers
S1300I scanner issues under Ubuntu 16.04 using Sane
In theory this scanner does work under Linux and Ubuntu. I've found this document that I tried to follow.
http://luuklangens.nl/blog/howto-fujitsu-scansnap-s1300-s300-ubuntu-linux
I install sane, copy firmware, confirm the location in the config…
csgeek
- 1,659
6
votes
1 answer
SANE Support for Canon LiDE 220?
I ordered a Canon LiDE 210 scanner because the SANE website says it's "completely" supported. The vendor delivered a Canon LiDE 220, and it's not recognized. Is this fixable, or must I return the scanner?
Gary Sawyer
- 61
5
votes
1 answer
Samsung SCX-3201 MFP scanner not working
I have a Samsung SCX-3201 MFP multifunction printer and after plugging it into the computer it recognises the printer part, but the scanner is not detected.
Since that I've fresh installed and did not try it again. The built-in scan application nor…
Amith KK
- 13,547
5
votes
1 answer
How well-supported is the Canon CanoScan LiDE110?
On the list of supported SANE devices the scanner is listed as fully supported but it says:
resolution from 75 to 2400 dpi
Here is a link to Newegg's item listing, where it lists the optical resolution as:
2400 x 4800dpi
I'm a bit confused here…
user6658
5
votes
1 answer
Using Canon LIde 700F with xane over USB
I know, I know, I should have never gotten a Canon to connect to a Linux box...
But the SANE supported-scanners doc said that the CanoScan 700F is supported "Good". I took that to mean that it can scan at all but the highest res setting (9600 dpi).…
4
votes
2 answers
Using scanner of Canon Pixma MG3052 with sane
I have bought this week a Canon Pixma MG3052, which is a multifunction printer. I installed the printer drivers from canon's website and "Scan Gear MP".
I am able to scan with the scangearmp2 command, but I am unable to do the same with scanimage.…
cube45
- 153
4
votes
1 answer
How to install the scanner of Canon MF4750 multi-device?
I am using 32 bit Ubuntu 12.04 LTS and bought a Canon i-Sensys MF4750 printer + scanner + fax. There is a driver on the official Canon homepage only for the printer, and that works fine. But I need the scanner too...
The scanner is not recognized…
Alabastrom
- 41