How do I check the battery's status via the terminal?

Question

I would like a command that displays the battery status in the terminal.

Lekensteyn · Answer 1 · 2014-02-20T23:40:59.257

The below command outputs a lot status and statistical information about the battery. The /org/... path can be found with the command upower -e (--enumerate).

upower -i /org/freedesktop/UPower/devices/battery_BAT0

Example output:

  native-path:          /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0
  vendor:               NOTEBOOK
  model:                BAT
  serial:               0001
  power supply:         yes
  updated:              Thu Feb  9 18:42:15 2012 (1 seconds ago)
  has history:          yes
  has statistics:       yes
  battery
    present:             yes
    rechargeable:        yes
    state:               charging
    energy:              22.3998 Wh
    energy-empty:        0 Wh
    energy-full:         52.6473 Wh
    energy-full-design:  62.16 Wh
    energy-rate:         31.6905 W
    voltage:             12.191 V
    time to full:        57.3 minutes
    percentage:          42.5469%
    capacity:            84.6964%
    technology:          lithium-ion
  History (charge):
    1328809335  42.547  charging
    1328809305  42.020  charging
    1328809275  41.472  charging
    1328809245  41.008  charging
  History (rate):
    1328809335  31.691  charging
    1328809305  32.323  charging
    1328809275  33.133  charging

You could use tools like grep to get just the information you want from all that output.

One simple way: piping the above command into

grep -E "state|to\ full|percentage"

outputs:

state:               charging
time to full:        57.3 minutes
percentage:          42.5469%

If you would often like to run that command, then you could make a Bash alias for the whole command. Example:

alias bat='upower -i /org/freedesktop/UPower/devices/battery_BAT0| grep -E "state|to\ full|percentage"'

Add that to the end of your .bashrc file, and you can type 'bat' any time, in the terminal.

There is also a upower -d (--dump) command that shows information for all available power resources such as laptop batteries, external mice, etc.

Terry Wang · Answer 2 · 2020-10-26T10:32:41.257

A friendly reminder: since Linux kernel 2.6.24 using /proc to store ACPI info has been discouraged and deprecated.

Now we are encouraged to use -> /sys/class/power_supply/BAT0.

UPDATE: Linux 3.19 and onwards, we should look at the following directory -> /sys/class/power_supply/BAT1/

For example, checking capacity & status running

Linux 4.20

# uname -a
Linux netbook 4.20.1-arch1-1-ARCH #1 SMP PREEMPT Wed Jan 9 20:25:43 UTC 2019 x86_64 GNU/Linux
# cat /sys/class/power_supply/BAT1/capacity
99
# cat /sys/class/power_supply/BAT1/status
Charging

and

Linux 5.9

# uname -a
Linux netbook 5.9.1-arch1-1 #1 SMP PREEMPT Sat, 17 Oct 2020 13:30:37 +0000 x86_64 GNU/Linux
# cat /sys/class/power_supply/BAT1/capacity
100
# cat /sys/class/power_supply/BAT1/status
Full

score 95 · Answer 3 · edited Sep 28 '23 at 07:13

First install acpi by running this command,

sudo apt-get install acpi

Then run:

acpi

Sample output:

Battery 0: Discharging, 61%, 01:10:12 remaining

Or for a more verbose output that constantly updates:

watch --interval=5 acpi -V

Output:

Every 5.0s: acpi -V Wed Jan 8 15:45:35 2014

Battery 0: Full, 100% Adapter 0: on-line Thermal 0: ok, 44.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 127.0 degrees C Thermal 0: trip point 1 switches to mode hot at temperature 127.0 degrees C Cooling 0: intel_powerclamp no state information available Cooling 1: pkg-temp-0 no state information available Cooling 2: LCD 100 of 100 Cooling 3: LCD 100 of 100 Cooling 4: Processor 0 of 10 Cooling 5: Processor 0 of 10 Cooling 6: Processor 0 of 10 Cooling 7: Processor 0 of 10 Cooling 8: Processor 0 of 10 Cooling 9: Processor 0 of 10 Cooling 10: Processor 0 of 10 Cooling 11: Processor 0 of 10

rubo77 · Answer 4 · 2018-02-07T01:10:32.353

34

Thanks to @Wilf this works on my Ubuntu 17.10 on Lenovo Yoga 720:

upower -i $(upower -e | grep '/battery') | grep --color=never -E "state|to\ full|to\ empty|percentage"

Output:

state:               fully-charged
percentage:          100%

Or just the numeric value with this one liner

upower -i $(upower -e | grep '/battery') | grep --color=never -E percentage|xargs|cut -d' ' -f2|sed s/%//

edited Feb 07 '18 at 01:10

answered Jul 02 '14 at 08:56

rubo77

34,024
52
172
299

score 33 · Answer 5 · edited Jul 26 '14 at 15:32

33

It's enough to type the command

acpi

For detailed information you can type

acpi -V

I didn't have to install any packages before.

System: Debian 7.2 64bit

edited Jul 26 '14 at 15:32

Charo

3,681

answered Jul 26 '14 at 14:36

user309404

331

score 23 · Answer 6 · edited Oct 09 '16 at 15:06

23

Here is an article on a package that can check your battery life at the command line.

Basically, all you have to do is:

sudo apt-get install acpi
acpi -V

edited Oct 09 '16 at 15:06

jokerdino

41,732

answered Jun 10 '11 at 04:57

josh-fuggle

331

score 19 · Answer 7 · edited Nov 10 '11 at 19:11

19

Maybe you can try:

cat /proc/acpi/battery/BAT0/state

cat /proc/acpi/battery/BAT0/info

edited Nov 10 '11 at 19:11

Kris Harper

13,705

answered Oct 20 '11 at 05:36

Mariano L

700

score 17 · Answer 8 · edited May 30 '16 at 09:05

I'm a little late to the party but here's my little contribution. Based on the previous answers , I have made a simple script batpower:

#!/bin/bash
# Description: Battery  charge in percentage

grep POWER_SUPPLY_CAPACITY /sys/class/power_supply/BAT1/uevent

The output for executing this ( ./batpower ) is going to be something like this:

POWER_SUPPLY_CAPACITY=23

N.B. : the batery number may be different for you, in my case it is BAT1, but you can always find it out by cd'ing to /sys/class/power_supply or as Lekensteyn mentioned through upower -e

My machine : Ubuntu 13.10 , 3.11.0

Replace BAT1 in the above bash code to BAT0 if you have older version Ubuntu i.e. 13.04 or later.

IMPROVED SCRIPT: Since my original post, I've made a small improvement to the script:

#!/bin/bash
# Description: Battery  charge in percentage

if [ -f /sys/class/power_supply/BAT1/uevent ]
    then grep POWER_SUPPLY_CAPACITY /sys/class/power_supply/BAT1/uevent

else echo "Battery isn't present"

fi

As always, pay attention to spaces with bash. This is all self explanatory. If battery is present, it will show up, if not - the script will tell you so. Now, go to your .bashrc file and add $(batpower) to your prompt. Here's mine promt:

PS1='[$(batpower)]\n${debian_chroot:+($debian_chroot)}[*\u@Ubuntu*]:\w\$ '

Update your terminal or open new tab or window, and now you can monitor battery charge constantly in terminal ! including tty ! May the scripting be praised ! enter image description here

SebMa · Answer 9 · 2021-07-24T17:54:34.057

You can either type :

$ acpi -i
Battery 0: Discharging, 98%, 02:51:14 remaining
Battery 0: design capacity 4400 mAh, last full capacity 3733 mAh = 84%

or

$ upower -i $(upower -e | grep BAT)
  native-path:          BAT0
  model:                PA5109U-1BRS
  serial:               FA80
  power supply:         yes
  updated:              lun. 07 janv. 2019 03:54:18 CET (24 seconds ago)
  has history:          yes
  has statistics:       yes
  battery
    present:             yes
    rechargeable:        yes
    state:               discharging
    energy:              39,521 Wh
    energy-empty:        0 Wh
    energy-full:         40,328 Wh
    energy-full-design:  47,52 Wh
    energy-rate:         13,856 W
    voltage:             10,8 V
    time to empty:       2,9 hours
    percentage:          98%
    capacity:            84,8632%
    technology:          lithium-ion
  History (charge):
    1546829628  98,000  discharging
    1546829593  99,000  discharging
  History (rate):
    1546829658  13,856  discharging
    1546829628  14,752  discharging
    1546829597  4,806   discharging
    1546829594  2,678   discharging

or with the distrib's inxi package (more up to date from the inxi official source code here)

$ inxi -Bxxx
Battery:   ID-1: BAT0 charge: 37.4 Wh condition: 37.4/47.5 Wh (79%) volts: 10.8/10.8 model: PA5109U-1BRS type: Li-ion 
           serial: FA80 status: Full

score 10 · Answer 10 · edited Apr 13 '17 at 12:23

10

You can do it without installing any extra packages:

$ echo $((100*$(sed -n "s/remaining capacity: *\(.*\) m[AW]h/\1/p" /proc/acpi/battery/BAT0/state)/$(sed -n "s/last full capacity: *\(.*\) m[AW]h/\1/p" /proc/acpi/battery/BAT0/info)))%
94%

This command is lifted from byobu's source. It might be a good candidate for a Bash alias.

edited Apr 13 '17 at 12:23

Community

1

answered Jun 10 '11 at 05:35

ændrük

78,496

score 8 · Answer 11 · edited Nov 23 '14 at 13:57

8

This did the job for me in ubuntu 14.04:

cat /sys/class/power_supply/BAT0/capacity

edited Nov 23 '14 at 13:57

s3lph

14,644
12
60
83

answered Nov 23 '14 at 13:29

the_saint

81

score 7 · Answer 12 · edited Apr 19 '11 at 14:37

7

Run the following command in a terminal for getting detailed info:

cat /proc/acpi/battery/BAT0/info

If you just want the state do:

cat /proc/acpi/battery/BAT0/state

edited Apr 19 '11 at 14:37

Lekensteyn

178,446

answered Apr 19 '11 at 12:20

MEM

11,255

score 7 · Answer 13 · edited Sep 02 '11 at 15:25

Install acpi, then use watch to continously monitor thru command line.

E.g.

watch --interval=5 acpi -V

will show the information such as below and will update every 5 seconds.

Battery 0: Full, 100%, rate information unavailable
Battery 0: design capacity 6000 mAh, last full capacity 3424 mAh = 57%

Question is why would someone do this? Well, I have a laptop with broken LCD screen that I am now using as my bittorrent box.

score 4 · Answer 14 · edited Sep 15 '12 at 17:39

I was going to suggest acpi but after reading it's not working in 11.10, I had an idea.

Please type this in your terminal: ls /proc/acpi/battery/BAT0 or BAT1

If you get a "file or directory not found" then this isn't going to work.

But, if it lists files, then here's a script [paste it into /usr/games/ or other directory in $PATH, and run sudo chmod +x /usr/games/batterypercent, or whatever you name it] that I just wrote for you that will give you an estimate battery percentage [See below]:

(Note, if not already installed, install the program calc from the repo: sudo apt-get install apcalc)

#!/bin/bash
math() { calc -d "$@"|tr -d ~; }
cd /proc/acpi/battery/BAT0;
max=$(grep 'design capacity:' info|awk '{print $3}')
current=$(grep 'remaining capacity:' state|awk '{print $3}')
percent=$(math "($current / $max) * 100");
echo $(echo $percent|cut -d. -f1)%

I have tested this script on my laptop. I say estimate above because acpi shows 93% battery, and my script shows 90% battery, so try this script against your GUI battery percentage, and see how off it is. In my case, it seems to be consistently 3% lower than acpi's percentage. In that case, you can add this line right before the last line: percent=$((percent + 3)), where "3" is the percentage it's low by.

**In my lenovo, the battery is listed as BAT1, try that too. (12.04 LTS)

score 3 · Answer 15 · edited May 02 '24 at 13:56

You can simple run: upower -i $(upower -e | grep -i BAT)

> upower -i $(upower -e | grep BAT)
  native-path:          BAT0
  vendor:               SMP
  model:                L19M3PF7
  serial:               3223
  power supply:         yes
  updated:              Sun 05 Mar 2023 02:33:38 PM EET (21 seconds ago)
  has history:          yes
  has statistics:       yes
  battery
    present:             yes
    rechargeable:        yes
    state:               discharging
    warning-level:       low
    energy:              5.45 Wh
    energy-empty:        0 Wh
    energy-full:         37.33 Wh
    energy-full-design:  45 Wh
    energy-rate:         16.219 W
    voltage:             10.82 V
    charge-cycles:       917
    time to empty:       20.1 minutes
    percentage:          14%
    capacity:            82.9556%
    technology:          lithium-polymer
    icon-name:          'battery-caution-symbolic'
  History (charge):
    1678019588  14.000  discharging
  History (rate):
    1678019618  16.219  discharging
    1678019588  14.814  discharging
    1678019558  13.941  discharging
    1678019528  12.350  discharging

Edit: Added -i to grep as battery is sometimes lowercase.

score 2 · Answer 16 · answered Nov 15 '14 at 18:24

Similar script without calc or apcalc:

#! /bin/bash
cd /proc/acpi/battery/BAT0;
max=$(grep 'design capacity:' info|awk '{print $3}')
current=$(grep 'remaining capacity:' state|awk '{print $3}')
percent=$(expr $current"00" / $max )
echo -e "Current capacity: \t$current"
echo -e "Max capacity:  \t$max"
echo -e "Percent: \t\t$percent"

score 2 · Answer 17 · answered Feb 28 '16 at 12:47

Here is what I use. It just looks at the diff between full charge and current charge as well as seeing if the charge is dropping in which case it uses notify to alert the user.

#!/bin/bash
#
# experimental battery discharge alerter
#
nsecs=3 # loop sleep time between readings
#
ful=$(cat /sys/class/power_supply/BAT0/energy_full)
#
oldval=0
while true
do
  cur=$(cat /sys/class/power_supply/BAT0/energy_now)
  dif="$((ful - cur))"
  slope="$((cur - oldval))"
  if [ "$slope" -lt 0 ]
  then
    echo "*** discharging!"
    notify-send -u critical -i "notification-message-IM" "discharging"
  fi
 oldval=$cur
 sleep $nsecs
done

score 1 · Answer 18 · answered Jan 07 '16 at 08:41

1

This won't help everyone, but it did me - I use byobu whenever I am using a terminal, and battery is one of the options for the status notifications bar.

answered Jan 07 '16 at 08:41

sheepeatingtaz

553

score 0 · Answer 19 · answered Apr 11 '25 at 06:03

Although most of the answers already work, my situation was slightly different. I needed the battery information for ubuntu, windows and mac. On every platform the command is different, so I made an cli app to simplify getting the battery information. The command is:

senzu

outputs for example:

It can be found at GitHub: senzu

score -4 · Answer 20 · edited Dec 16 '12 at 00:58

-4

cat /proc/acpi/ac_adapter/AC/state

edited Dec 16 '12 at 00:58

Eric Carvalho

55,453

answered Apr 19 '11 at 12:03

Todd Harris

9

How do I check the battery's status via the terminal?

20 Answers20

Linked

Related