Most Popular
1500 questions
9
votes
1 answer
Fix / Replace ABS module
I have an Audi A6, 2000. My ABS light is on, and the brake light blinks. I was told that the ABS module needed to be replaced at the cost of $850 minimum.
Is there a way to get these things fixed rather than having to fork out so much cash? I can…
Spenduku
- 191
- 4
9
votes
5 answers
Can revving the engine in neutral cause damage?
I pulled up at a light the other day next to a kid driving (what I assume to be) his dads 5.0 Mustang. As he proceeded to bounce off the redline and roast away half the clutch when the light turned, I was reminded of an old rumor I came across on a…
MooseLucifer
- 6,027
- 4
- 28
- 55
9
votes
2 answers
Do parts (like Brakes) & brake dust still contain Asbestos? What years did parts contain Asbestos (or anything equally / more dangerous)?
Is Asbestos still used in any currently manufactured parts, brakes or others? Specifically asking about the USA & Canada, but info on anywhere else in the world is good too.
If it's not still used, what year did Asbestos stop being used? - Just in…
Xen2050
- 698
- 6
- 16
9
votes
2 answers
Carb. Rebuild or Adjustment?
Just put a rebuilt 2 stroke and brand new Mikuni SBN carburetor in my jet boat. Got her running no problem the first couple times, now it seems I can't get any gas into the carburetor from the primer bulb. The primer gets very firm and I am…
Calvin
- 489
- 2
- 6
- 18
9
votes
2 answers
How can I tell if a car battery that went completely flat is permanently damaged?
I've had a lot of electrical problems with my car, and a couple of times, the car battery voltage got drained absurdly low (like below 2V) for short periods of time. I gather that fast charging completely flat batteries is bad for them, and that…
user56reinstatemonica8
- 2,648
- 12
- 31
- 58
9
votes
4 answers
Motor Industry reliability data - is there a source?
As a consumer, I have very little to go on if I want to buy a reliable new car - the reputation of the company, past reliability reports/opinion/reviews for older models, perhaps I could infer something from the warranty on offer...
But fleet…
John U
- 476
- 2
- 7
9
votes
2 answers
What can cause a steering wheel to end up misaligned, and how to investigate?
Similar problem to Steering wheel “center” different from vehicle “straight”, except:
In my case there's no obvious cause, it just happened one day, so the "take it back to the shop" answer isn't an option for me
I'm primarily interested in how to…
user56reinstatemonica8
- 2,648
- 12
- 31
- 58
9
votes
6 answers
Are there "standard" torque values for fasteners?
For "normal" applications (say attaching the oil pan or valve cover) are there standard or typical torque values for fasteners? I'm wondering if it is possible to use a rule of thumb for those fasteners when you don't have access to a service…
dlu
- 14,506
- 8
- 52
- 85
9
votes
2 answers
Why is my shifter lever extremely stiff or hard to shift gears?
My 1985 Yamaha 750 Maxim shift lever is extremely stiff or hard to shift. When I pull off the casing that it passes thru or even loosen the bolts to the case it shifts normally.
What can the issue be?
Why does it shift normally when I loosen the…
Mike
- 91
- 1
- 2
9
votes
2 answers
How many volts/watts does a car battery give off?
How much power does a car battery contain, and for how long? I heard that batteries give off a massive amount of power for the first few minutes, then drop off. Let's say this is a new battery, fully charged and ready to go.
LostPecti
- 1,711
- 4
- 23
- 31
9
votes
3 answers
Is it right to say that VTEC is solely by Honda?
I have an i-VTEC engine, which Honda claims to be a better and computerized version of their famous VTEC Engine.
Now I am wondering: Is it right to tell people that only HONDA has VTEC?
or is this technology distributed to other manufacturers as a…
Jomar Sevillejo
- 1,307
- 3
- 16
- 27
9
votes
2 answers
Troubleshooting Low Turbo Boost
I'm starting to suspect that the smoke and low power (I'm pretty sure it is not "limp mode" just a lack of enthusiasm) I'm seeing in our 2002 Jetta TDI (ALH engine with Garret VNT-15 turbocharger) may be a turbo issue. Here's what I'm…
dlu
- 14,506
- 8
- 52
- 85
9
votes
1 answer
Does leaving the choke closed increase fuel consumption
I ran out of fuel using my outboard engine the other day, when I had checked the tank beforehand and thought I saw plenty of fuel. I had forgotten to open the choke for twenty minutes or so. My question is, does leaving the choke closed increase…
Nic
- 193
- 1
- 4
9
votes
4 answers
How should I remove paint from calipers?
I have a set of STI brake calipers that I'm interested in refinishing. From the factory, they come with a black finish and white lettering. What is the best way to remove the existing finish so that I can repaint them how I want?
Azhdeen
- 1,197
- 4
- 15
- 29
9
votes
4 answers
"Always Replace" (torque-to-yield) Bolts
I'm working on a VW Jetta and have pulled one of the suspension ball joints to replace a drive shaft. The three bolts holding the ball joint to the lower control arm are marked in the Bentley service manual as "always replace."
In the videos and…
dlu
- 14,506
- 8
- 52
- 85