Questions tagged [mondeo]

21 questions
3
votes
4 answers

Mondeo MK3 power consumption and damaged radio

I'm not quite sure if this is the best Stack for my question but I will try. So from some time I noticed that in my car when engine is turned off there is still quite huge power consumption which causes after 3-4 days I cannot start the engine.…
wawek
  • 133
  • 6
3
votes
0 answers

ford mondeo v6 st24

Just wondering if anyone can help as we have this Mondeo and all of a sudden all the ignition went and have no power at all. Any suggestions as to what it might be? All the fuses are fine and still power is going to the interior lights and we still…
3
votes
1 answer

Is the knock an early sign of Dual Mass Flywheel problem. Main dealer says acceptable noise?

Ford Mondeo 2012 1.6 TDCi DPF SS 115. At 15,500 mls I am experiencing a knocking sound when raising the clutch pedal but only when the engine is running. The sound outside the car is really loud. It is still in warranty. Initially Evans Halshaw said…
Charley
  • 31
  • 2
2
votes
1 answer

Ford Mondeo 2014 Mk4 Headlamp fuse/relay location

Last night I noticed by headlamps weren't working ... I rotated the knob and only the day running lights remained on. I toggled full beam and that worked... so it's just normal beam and whilst I was turning the dial back and forth, a message…
Snubbed
  • 21
  • 1
  • 1
  • 3
2
votes
1 answer

Ford not starting on key turn after acc

I've got a mk3 Mondeo 1.8petrol zetec. It had bad alternator so I left it laying up for 6 months until I got around to getting a new one, but 3 weeks ago with the bad alternator in it, I started car up to keep the engine in good useful order for…
2
votes
2 answers

Ford Mondeo mk3 Radio 6006e ISO adaptor

I need to replace a radio-cd 6006e and I need the ISO adaptor. I don't know what is it or where to find that information. Thanks,
rfmoz
  • 131
  • 3
2
votes
0 answers

Power Loss in lower gears

I have a 2004 Ford Mondeo 2.0 TDCI. I have heard about something called the EGR (Exhaust-Gas Recirculation) that can get clogged up and need cleaning. Is this right? Also, where would I find this on the engine?
Dom Lane
  • 21
  • 1
2
votes
2 answers

2000 mondeo overheating

I recently changed a leaking thermostat housing and thermostat on my 2l petrol 2000 mk2 mondeo. Now I find that at idle it is fine, I can leave it idling and the fan cuts in an out, and the temp stays about the quarter mark where is usually is...…
user15528
  • 21
  • 1
1
vote
0 answers

Do you need any specific tools to change a DPF and vaporizer?

I've just been charged a ridiculous amount for a new vaporizer and a DPF clean. I could have bought an entirely new DPF and vaporizer myself and fitted them at home for less than what I just paid. Is there anything to be aware of if I were to do…
James Coyle
  • 119
  • 2
1
vote
1 answer

Can I change tyre 215 to 205?

Can I change my tyres 215/60/16 to 205/60/16? I bought them from Facebook marketplace by mistake.
1
vote
1 answer

Very brief loss of power and puff of smoke, diesel engine

I have recently purchased a 2004 Jaguar X type 2l diesel. When driving at steady speed on the motorway, there are frequent (about 1 every 2 minutes), brief (fraction of a second) and slight (just noticeable change of momentum to the driver, no…
Dave
  • 121
  • 3
1
vote
0 answers

Ford Mondeo 2006 TDCI won't start

First of all I am new to the forum world but I have reached a dead end and would welcome any new input. My Mondeo was driving perfectly when suddenly and without any warning symptoms the engine cut out and will not start. I am not new to working on…
timtenor
  • 11
  • 1
1
vote
1 answer

Ford Mondeo 2010 MK4 P2002 Error code

I've had P2002 error code on my Ford Mondeo MK4 2010 2.0tdci for a couple of months now and I can't find the fault. It's been to the mechanics and had new dfp hoses, a manual regeneration, a good run down the motorway and finally a new DPF fitted…
T.dew
  • 11
  • 1
  • 3
1
vote
2 answers

Location of MAP sensor in Ford Mondeo 2.2 TDCI (MK3, 2006)?

My car has a pending fault P0235 (Turbo Charger Boost Sensor "A" Circuit), the turbo charger does not work and there's a huge lack of power. The turbo itself is most probably (mechanically) ok and I also checked the turbo control unit, all wire…
Rob
  • 113
  • 1
  • 1
  • 5
1
vote
1 answer

Which rpm´s should i run my Turbo Diesel at?

So this question has been itching in me for quite a while but i´ve been too lazy ask. I have a Ford Mondeo 2005 2.2 TDCI and my question is how high or low rpm´s should i be driving my car(i know it´s kinda stupid question but still). I´ve always…
1
2