Questions tagged [clutch-hydraulics]
26 questions
6
votes
1 answer
Which is it: transmission, clutch, or slave cylinder?
I have a problem with my '92 Geo Prizm 5-speed manual transmission. I could use some advice from someone knowledgeable about manual transmissions.
Here are the symptoms:
DURING cranking, in Neutral, the car races forward as if in gear and it will…
Dan
- 101
- 3
5
votes
3 answers
Hydraulic clutch not engaging after bleed F350
1989 Ford F350 5.8 EFI. Manual.
Clutch pedal was very stiff and was only able to disengage the clutch at the bottom of its travel. Bled the system, and now the pedal falls to the floor; clutch remains engaged. Relevant info:
The reservoir is…
Zshoulders
- 1,646
- 2
- 14
- 23
4
votes
2 answers
Clutch slave/ master cylinder, OK to get from junkyard?
Strictly new or junkyard sourced ok?
100-150k miles on junkyard vehicle.
Bad idea or what?
Elcucuy
- 561
- 1
- 8
3
votes
1 answer
Clutch bleed (reservoir shared with brake system)
My Civic has a separate fluid reservoir for the hydraulic clutch system. I bled it last week with the method outlined below and it went great.
My Yaris shares a single reservoir of brake fluid for the brake and clutch systems. This threw me off and…
jsstuball
- 223
- 1
- 8
3
votes
1 answer
The clutch keeps going out in my truck
my 94 ford ranger was fine then all the sudden the clutch went out. It wont go into gear and when you try and put it in reverse it grinds really loud. i have replaced the master cylinder three times and the slave cylinder twice. The fluid was gone…
user29770
- 31
- 1
3
votes
2 answers
Fluids for Citreon Berlingo Diesel With Manual Transmission
Opened the bonnet, looked to LHS beyond screen-wash reservoir, removed cap on (?) hydraulic oil, found it to be RED in colour and below minimum level when engine not running.
Went to shop: insisted I buy hydraulic oil for manual - GREENish in…
clint mede
- 241
- 1
- 2
- 5
3
votes
0 answers
Toyota 04 Camry
please help
Changed clutch and slave cylinder
Trying to bleed it but just air bubbles
Can't see any leaks
It's a 2004 Camry
Could it be the booster ?
Kim Curtis
- 31
- 1
2
votes
1 answer
What's causing this discoloration in my clutch line?
This is my Ducati Monster 696 2012. The clutch line is discolored as you can see. I have been less than diligent in flushing my clutch fluid, so I would guess the fluid absorbed water and caused rust. I know the bike is advertised as having "steel…
AdamO
- 360
- 1
- 3
- 15
2
votes
1 answer
Mazda 6 2004 Clutch Pedal Will Not Return
Recently changed the clutch master cylinder on a Mazda 6 2004 and when trying to bleed the system found that the clutch pedal will not return to the up position. Thought maybe a problem then with the slave cylinder so I did remove it and attached…
user44613
- 21
- 1
- 3
2
votes
3 answers
Clutch pedal feels sticky in cold weather
Car: 2010 Mazda 3 2.5L, Manual Transmission, 163000 kms.
My clutch pedal feels sticky when the outside temperature is low(below -10C). By sticky, I mean it requires a bit more effort to push it in and it takes longer than normal for the pedal to…
rana
- 602
- 3
- 11
- 26
2
votes
0 answers
1998 cherokee sport 4x4 hydraulic clutch problems
The clutch in my 19
98 Jeep Cherokee four by four feels like its frozen. The transmission will not go into any gear, including reverse. Whether the car is started, or not.
April Valdez
- 21
- 1
1
vote
1 answer
Car Will not go into Gear. Stranded
Problem started two days ago. The car would struggle to get into first gear, from neutral at standstill, but with some resistance (NOT grinding) it would go (and same thing with second gear, with a bit less resistance.) Third and Fourth were fine,…
Elcucuy
- 561
- 1
- 8
1
vote
1 answer
06 Chevy Aveo 5-speed Manual - every gear I put in it's like it is in neutral
I have an 06 Chevy Aveo 5 speed manual transmission and about 200,000 mi on it I just bought it so I don't really know too much about the history the problem I'm having right now is that I could put the clutch in to start the vehicle put it in gear…
Anthony Lutack
- 11
- 1
1
vote
1 answer
New clutch questions
I just had the clutch replaced in my 98 civic ex.
First thing I noticed is that the engagement either grabs or doesn’t, if that makes sense. I’m used to being able to “ride the clutch” a bit to get the car rolling smoothly, but now it just catches…
user58423
- 73
- 1
- 1
- 4
1
vote
1 answer
Replaced clutch master cylinder - won’t shift right unless I remove free play in pedal?
Hello I recently replaced the clutch and master cylinders in my 98 Honda Civic with 192k original miles on the clutch.
After setting the pedal free play to 12mm (per service manual specs) I noticed it has a hard time engaging gears especially…
ohmmy
- 615
- 2
- 10
- 16