Questions tagged [chrysler-300]
10 questions
4
votes
1 answer
Overheating with bubbles when parked
My 2012 Chrysler 300 is overheating. It bubbles when parked. The overflow reservoir was empty 4 days ago so fluid was replaced car was fine -- no evidence of leakage now. Reservoir is very low and car is overheating again. I think it's the cap, but…
Amy Shackelford
- 41
- 1
- 2
4
votes
1 answer
Car goes in reverse when put in drive
Car:2007 Chrysler 300 2.7
I went to start my car this morning, put it in drive, but it wouldn't go. Then I put it in reverse and it would drive back as well as neutral. So then I turned the car engine off and tried again - I put it in drive and it…
kenney Hill
- 41
- 1
- 1
- 2
3
votes
1 answer
Chrysler 300 shifts from Drive to Reverse when going uphill
This is a 2012 Chrysler 300.
Had recall done labor day weekend on gear shift software and now when I go up a hill the car jumps from drive to reverse and rolls back.
Then later on 3 to 4 hours later the car starts jumping form drive to park, reverse…
Ms.sampson
- 31
- 2
3
votes
0 answers
How to fix U0164 error code for Chrysler 300 2006?
I have Chrysler 300 2006. The check engine light is on and an error code U0164 was diagnosed. Does anyone know the problem and how to fix it? I know nothing about cars Thanks a lot!
CuckDaddy420
- 31
- 2
3
votes
2 answers
Motor oil going into the radiator and reservoir- Chrysler 300
I got the motor heads modified (think thats what you call it), timing belt and water pump replaced in March 2014. The last few months I've been having problems with my car over heating. It turns out it's the water pump, which was under warranty, so…
rosa
- 31
- 1
- 2
2
votes
1 answer
Brakes smoking and rpm off chrylser 300
So my buddy bottomed out his car kinda back and it was revving high but not speeding up so he took it to his mechanic and had him check the transmission but he said it was all good so he took it home and then noticed his front left tire was smoking…
Nick Mori
- 21
- 1
1
vote
1 answer
Rough idle or slight miss at idle in relation to purge valve
I'm working on a 2006 Chrysler 300, with the 2.7L v6 (the internal water pump one). I just replaced the EGR valve due to a P0404 and surging while driving (verified with a scan tool the EGR valve would stick), while I had the intake manifold off I…
David Scheiber
- 81
- 8
0
votes
0 answers
Brake pulse before & after brake job?
2012 Chrysler 300 RWD…. My brakes were pulsing so I assumed the rotors were warped. I changed the pads and rotors (duralast / autozone OEM replacements) and cleaned the hub up with a wire brush before I put the new rotors on the hub. When I put the…
JG123
- 1
0
votes
1 answer
2005 Chrysler 300
So I have a 2005 Chrysler 300 I was driving down the freeway it was not overheating but it lost power and a lot of smoke came out of the hood I opened it oil spill all over no oil no water in the spark plugsthe water was not there what could it be
-1
votes
1 answer
Drive no longer works on my Chrysler 300
I have 2006 300 Chrysler V6 Hemi engine AWD.
I went to start my car this morning, put it in drive, but it wouldn't go. Then I put it in reverse and it would drive back as well as neutral. So then I turned the car engine off and tried to turn it back…
keletheia
- 1
- 1