2

I do not understand how tightrope walkers return themselves to equilibrium.

I am not concerned with the direction along the rope or wire where their base can be large, and they are able to move their foot forwards or backwards.

I am thinking about the system through the wire. For simplicity, can we assume the wire is perfectly taut so the contact point is fixed? The walker is a mass (or connected articulated masses) balanced above a point (the wire) to which they are connected by a low friction pivot.

The walker is at equilibrium when their centre of mass is directly above the tightrope.

I've read the top few Google hits. They mention a rod or other device may be carried, to provide a larger moment of inertia that will damp the onset of rotations. They also mention that it lowers the centre of gravity, which will reduce the turning moment that begins rotation. This makes sense and I can see that would help. What they don't mention is how a walker returns themselves to equilibrium once they have moved away from it.

Conservation

This is probably very confused, but whatever a walker does, they as a whole (system) must conserve centre of mass (and momentum), right? Because of this I don't understand how anything that they can do (moving a leg out, say) can actually make a difference! Any change they make just leaves them with their mass differently spread about but the centre of mass in the same place, and still not at equilibrium.

Standing on one leg

I think that a similar system is at play when I balance on one leg. I've noticed that if I stand on my right leg and force myself out of equilibrium by falling to the right, then I will lift up my left leg to somehow balance myself. Why doesn't conservation ensure that lifting my leg like this simply topples me further to the right?

"Practical" use

Given that a tightrope walker can balance, it must surely be possible to build a (compound) inverted pendulum that can balance without moving its ground contact point in the way that these control systems typically do?

Community
  • 1
Benjohn
  • 3,340

1 Answers1

1

To simplify we can treat the wire as perfectly taut.

This allows the rope to exert a force on the tight rope walker (TRW)

Also for simplicity imagine the TRW as a solid body with a solid body pole that can be rotated about an axis parallel to the rope at a fixed location relative to the TRW.

Now, if the TRW is tipping clockwise their center of gravity will be to the right of the rope and moment created by gravity will add clockwise momentum. Similarly, if the TRW is tipping counter-clockwise gravity will add anti-clockwise momentum.

So the angular position of the TRW determines if clockwise rotational momentum is added or subtracted from the TRW+pole system. This angular position is determined by integrating rotational momentum of the TRW (divided by the moment of inertia) The amount of rotational momentum the TRW has can be modified by transferring momentum to and from the pole. While this doesn't directly affect the TRW+pole system's rotational momentum, it allows the TRW to control their angle, which in turn will affect the momentum of the system.

So if the TRW has too much clockwise momentum, and wants to move back to equilibrium, they can transfer a lot of clockwise momentum to the pole to temporarily tip themselves in the counterclockwise direction. If they tip far enough, then gravity will be eating away at the extra clockwise momentum, and the TRW can then take back some of the momentum given to the pole to bring themselves back to a neutral angle.

Eph
  • 4,630