Most Popular
1500 questions
12
votes
4 answers
Is 60/40 solder fine for splicing wires that have to endure hot engine bay temps?
I need to splice the pigtail connectors from my old O2 sensors onto the new O2 sensors since the new connectors have a different shape.
As the sensor is right behind the engine and will experience high temperatures, I want to know whether regular…
Zaid
- 39,276
- 50
- 151
- 294
12
votes
1 answer
Does the air screw only affect the pilot jet?
I have a 2 stroke motorcycle, it's Kawasaki KR150. When I try to do some jetting on its carburetor (it's Keihin PWL26), I saw that there's an air screw.
So now I've been wondering about this air screw on 2 stroke motorcycle carburetor, since I'm a…
edwin
- 141
- 1
- 5
12
votes
6 answers
How far can you drive with an empty radiator?
The radiator on my Peugeot 106 has started leaking very badly and needs replacing. I don't have time to fix it at the moment, so I'm taking it to a garage. How far can I drive it without damaging the rest of the car? Or do I need to get it towed?
Rob White
- 221
- 1
- 2
- 4
12
votes
4 answers
How to understand different engine oils?
When I went to shop for engine oil, I found many types as such:
5W-30 A5
5W-30 A1
5W-20
SAE 5W-30
10W-30
Also I see other information such as:
Fully Synthetic
Semi Synthetic Oil
Synthetic Blend
These are just subset of what I found.
So, how can I…
malhobayyeb
- 223
- 1
- 2
- 5
12
votes
2 answers
Do I Need to Compress the Springs to Install Strut Tower Braces?
I have a '99 Maxima.
I am considering installing strut tower braces. In order to do so, would I need to get spring compression tools to hold the springs on the struts, or will the weight of the car be sufficient to hold it in place when I remove…
eidylon
- 337
- 4
- 11
12
votes
11 answers
How can I remove the rearview mirror button off my windshield that I just put on upside down?
How can I get a rear view mirror button off the windshield if it was put on upside down?
L isa o
- 121
- 1
- 1
- 3
12
votes
3 answers
Is there a way to tell if a timing belt has been changed without actually changing it?
I had this 2003 Honda Civic checked out by a mechanic before I bought it, and the mechanic said it looked like the timing belt hadn't been changed he couldn't tell if the timing belt had been changed. How would they have checked this?
The woman who…
endolith
- 1,347
- 8
- 24
- 42
12
votes
5 answers
2003 Chevrolet Impala - Jerks after Stopping
I have a 2003 chevy impala. When I hit the gas (whether it be a light tap or hit it pretty hard), my car kind of waits a second, jerks and then takes off (revs go kinda high when it's waiting). To me it kind of feels like the first gear is…
DForck42
- 223
- 1
- 2
- 7
11
votes
4 answers
What is the best practice to maintain a bike?
I have an Avenger 180cc bike, I want to maintain the bike without much help from the service
center, external help etc.
What would be the best practice methods?
Prabhanjan Naib
- 219
- 1
- 4
11
votes
2 answers
Chicken vs Egg Symptoms from 2005 Suburban 5.3 FlexFuel
Please help me figure out if low RPMs on my daughter's 2005 Suburban 5.3 FlexFuel is the cause or a just symptom of problems with oil and fuel pressure. The problem only happens when the engine is warm and I think that’s because it runs 200-300…
AlexPace
- 113
- 5
11
votes
3 answers
Horrific squealing when car is first turned on?
This is a really classic and common old car problem. I see it all the time but this is the first time it's started happening to my own car.
Basically when I first turn the car on, there's instantly a pretty horrific squealing that sounds…
temporary_user_name
- 1,917
- 10
- 27
- 39
11
votes
4 answers
jacking up a car on "grass paving block" - how to secure jack and supports?
I want to jack up my car so I can work under it. Sadly, the only non-inclined surface I have available is covered in grass paving blocks similar to this:
I have a pneumatic jack that I would use to lift the car up on one side, then I'd put these…
Syndic
- 211
- 2
- 6
11
votes
3 answers
Why would it be "unwise" to drive a car after water has got inside the passenger compartment?
The Guardian has a consumer piece on a hire company generally being awkward when one of their cars was caught in a flood. The final statement about driving it after the flood struck me as kind of the opposite of what I would have thought. Here is…
User65535
- 505
- 5
- 13
11
votes
3 answers
Diagnosing a worn wheel bearing
I've noticed an increase of road noise while driving my car and I'm wondering if it might be the wheel bearing. I think it's coming from one of the rear wheels.
Is there a way to identify and confirm if a wheel bearing is worn, and therefore in need…
BG100
- 538
- 1
- 6
- 11
11
votes
5 answers
Is it bad to drive a vehicle if power steering is defunct?
My truck's power steering pump is broken (leaking) so I had to drain the fluid. I was able to drive it around the parking lot, with considerable difficulty steering. I need to get the truck home, which is 25 mi away. Aside from the difficult…
amphibient
- 6,777
- 42
- 102
- 139