Questions tagged [liberty]
28 questions
8
votes
2 answers
Gas pedal stops responding after driving for some time
My daughter has a 2005 Jeep Liberty Sport. She drives it to school daily and then home after school with no problems. But, if she uses it to run around town on errands it starts but the gas pedal won't respond.
If she allows it to completely cool…
Heath A Boddorf
- 81
- 1
- 2
5
votes
1 answer
2011 Jeep Liberty ran without oil, did this cause my engine to blow?
I have a 2011 Jeep Liberty and the oil pan rusted out and it was driven for a while without oil. The oil pan was fixed a couple days later. This happened in April 2014, in Oct 2014 the engine started to rap (knock). I brought it to the shop and it…
Michael
- 51
- 2
5
votes
2 answers
2006 Jeep Liberty - AC clutch won't engage
The AC clutch on my Jeep Liberty 2006 won't engage. Here is what I have checked so far.
Fuse 14 in the passenger cabin
21 in the engine compartment are ok
AC relay ok
When I jump the AC relay I am able to engage the compressor and get cold air,…
mark b
- 51
- 1
- 1
- 2
4
votes
1 answer
2004 Jeep Liberty overheating
My car overheated on the drive in to work today. I'll describe the symptoms...
I've been dealing with a minor coolant leak for about a month now. I top it off once per week, about 1L of fluid. The leak is coming from the upper corner of the…
AWT
- 143
- 1
- 5
3
votes
0 answers
05 Jeep Liberty V6 - Battery died, computer reset, running extremely rough. Only code is P0137, and new o2 sensor reads 0v
Title basically sums it up, I have an 05 Liberty with the V6. Battery died over the big chill last week because I left a dash cam plugged in for a few days. Once I got the car running, it was running extremely rough. It was consistent though. I…
abakedapplepie
- 31
- 1
3
votes
2 answers
Parking brake needs constant maintenance
Every other year my parking brake fails inspection. The problem is almost always the parking brake levers and actuators have froze. Typically, I take it apart, clean off any brake dust and rust, add a little antiseize lubricant (Permatex…
rtaft
- 175
- 7
3
votes
2 answers
2002 Jeep Liberty 3.7 MISFIRE multiple cylinders
2002 Jeep Liberty with approximately 130,000 miles.
Engine is misfiring on multiple cylinders. Burnt wire smell and smoke coming from firewall area. After troubleshooting, I believe the engine is running on only one cylinder. Smell coming out of…
Aaron Kephart
- 31
- 2
2
votes
1 answer
Can 2008 engine be installed in 2009 liberty?
my engine gave out and dealer replaced it. Is it possible for 2008 engine to be put in a 2009 Liberty?
I did my oil change now, and the oil filter for 2009 Jeep Liberty did not fit. The filter was Mopar 4781452BB which are used for 2008 Liberty (I…
user54770
2
votes
2 answers
Window switch works when it wants to
I bought an aftermarket window master switch for a Jeep Liberty it works most of the time when it stops working and all I do is unplug it and plug it back in and it works fine for about a week then stops working I unplug it works again for another…
Tony
- 21
- 1
2
votes
1 answer
How long will it take for my heat to work after refilling antifreeze?
Two days ago the heat in our 2011 Jeep Liberty was working fine. Yesterday my wife said the heat wasn't working, it was blowing air but it wasn't warm. I looked online and it was suggested that the first thing to do was to check the antifreeze…
Pete Harris
- 21
- 1
- 1
- 2
2
votes
1 answer
Vehicle makes weird sound on left side when braking
I have a jeep liberty 07. I bought it used in a okay condition as it had been in a accident. everything runned great when I first bought it but then one day when I applied the brake the pedal got hard and a noise was heard in the left side. This…
Corina Cast
- 21
- 1
2
votes
0 answers
Jeep engine issue
I have a 2003 Jeep Liberty.
It backfired really loud this morning and now when I try to start it it runs for about 2-3 seconds at 6,000 RPM's and dies.
Does anyone have any theory's as to why this might happen?
How can a backfire create a…
PJW
- 21
- 1
2
votes
1 answer
2002 Jeep Liberty 3.7 v6 misfires and bucks
Have an 02' jeep liberty with a 3.7l v6. Originally received a random misfire code and a code for misfire on cylinder 5. Replaced the coil on cylinder 5 and the random misfire code and misfire for cylinder 5 went away but started receiving a code…
nullReference
- 121
- 2
2
votes
2 answers
Correct Relay Splicing Methodology (Backup Camera & Reverse Wire)?
Some of you may recall my previous thread where I asked what the best way to splice a webcam into the reverse wire of a car. While these questions are similar in topic, this one focuses in on the specific use of the relay, and the problem I have…
Chrøme
- 180
- 1
- 2
- 7
2
votes
1 answer
Ac on 2006 jeep liberty
Does the ac system have to be empty to change high pressure switch on 2006 jeep liberty. I have tested everything on the system electrical and I have power ac is full of Freon but clutch will not engage. Jumpered low pressure switch and still no ac
user12788
- 21
- 2