5

Hi am greatly confused with the on/off position of choke in Hero Passion XPro (2014 model).

I am able to set it in three different positions

  1. Vertical (the choke switch pointing downwards) (image below)
  2. Diagonal
  3. Horizontal (pointing towards the fuel switch).

I want to know which of these should i use while riding?

Edit 1 : Image of vertically positioned choke switch : enter image description here

DucatiKiller
  • 32,976
  • 22
  • 150
  • 267
AAG
  • 51
  • 1
  • 1
  • 3

2 Answers2

1

Turn the choke ON to start a cold engine. I cannot see the image, so I do not know if this is vertical or horizontal. If you can look at the choke blade, the choke is ON when it is blocking the path. Once it is running, set it to PARTIAL (diagonal) until the engine is warm. Once the engine has been running a few minutes, set it to OFF.

Choke helps the engine run rich. This is necessary when the engine is cold. The engine will start easiest with the choke on. The engine will run best when warm with the choke off.

rpmerf
  • 8,458
  • 1
  • 22
  • 31
1

Check this out.. It's the same question on another forum.

Based on the markings on other motors I have, that should be closed/on and up would be open/off. Post a picture of the switch in the horizontal position too for more accurate help.

kyle_engineer
  • 3,289
  • 12
  • 23