1

This question is somewhat related to an earlier question: Cheapest FPGA's.

I have been searching for a cheap FPGA board with PCI express 2.0 or 3.x support. Such boards can be plugged in one of the compatible PCIe slot on a motherboard, and can be programmed using either HDL entry or OpenCL or C/C++ based HLS tools. In order to facilitate data transfer between CPU DDR and FPGA DDR memory, the board comes with programmable DMA controllers.

There is a company which sells such boards(Nallatech), but the starting board prices are just too high (> 5000 USD). Then there are FPGA PCIe boards sold by Xilinx and Altera with minimum 1300 USD price. But all these are still too expensive for me. Can someone recommend a cheaper FPGA board from Xilinx/Altera with a PCIe 2.0 or 3.x support ?.

Community
  • 1
nurabha
  • 887
  • 5
  • 15
  • 29
  • Shopping questions are off topic on ee.se. But either way, cheap and PCIe don't go together. You can get Stratix IV boards for $4000 or so. – Tom Carpenter Jul 31 '15 at 19:36
  • PCIe transceivers are only embedded in mid-range and high-end FPGAs. 2) These FPGAs need a complex power supply and wiring, which need expensiv PCBs. 3) Only big FPGAs are attractive for accelerator usage and HLS purposes. 4) because you want to use high-level approches, you'll need a set of IP cores (PCIe, DMA, DDR RAM vontroller, ...) these cores are expensive and are only shipped with high-end boards. 5) Nallatech boards for 5000 USD are cheap compared to other boards :).
    • – Paebbels Jul 31 '15 at 19:59
  • The FPGA itself is the majority of the cost of the board. Take one of those boards, and search on the FPGA part number alone. – alex.forencich Aug 01 '15 at 17:25
  • @Alex - true dat ... there was a time when the price on the Xilinx boards (ML506,7) I mentioned was less than the one-off price quoted by distributors for the FPGA... may still be true for the boards above. –  Aug 03 '15 at 10:07
  • 1
    PicoEVB is the answer. – chx May 25 '18 at 08:30