2

I cannot configure enp2s0 interface despite going through forum and many instruction pages. The interface does not show ip address in configuration though the interface is UP.

Cable is working. Tested on other devices, and with tester.

These are the contents of /etc/network/interfaces file:

#the loopback network interface

auto lo
iface lo inet loopb

auto enp2s0

iface enp2s0 int static
address 192.168.1.10
gateway 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255

iface enp2s0 inet dhcp

I have already tried restarting the Network Manager and bringing the interface down and back up again. What else do I need to do?

Eliah Kagan
  • 119,640
Trevor Gordon
  • 21

1 Answers1

2

Please adjust your file to:

auto lo
iface lo inet loopback

auto enp2s0
iface enp2s0 inet static
address 192.168.1.10
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1 8.8.8.8

Restart the interface:

sudo ifdown enp2s0 && sudo ifup -v enp2s0

Did you connect?

ifconfig
ping -c3 www.ubuntu.com
chili555
  • 61,330