1

One of my Pentium 4 HT machines is slow all the time with Windows XP, so I unplugged the drive with Windows on it and put a 160GB hard drive in there and burned Minimal Lubuntu to a CD (only version of Ubuntu I could fit onto a 700MB CD). Installation went pretty smoothly.

However, now when I start the PC up, it goes through BIOS stuff and it shows the Ubuntu 16.04 loading screen and takes a minute or so to load.

Afterwards however the screen goes black and in the top corner I get...

/dev/sda1: clean, 57315/9740288 files, 913160/38941440 blocks

Nothing else displays on the screen. I left it like this for about half an hour today as I found a post that said it was a standard check but the thing hasn't budged since. I have seen a few forum posts online saying it's a video driver issue.

This is my first time really trying to put Linux on a computer for use, so if there is a solution to this, please explain it to me like I'm 5 years old.

Thanks

P.S.

PC is running a 2.80GHz Pentium 4 with Hyper-threading, 512MB RAM and an FX 5200 GeForce card. GMA 915 onboard produces blank screen after bios when I encountered this problem.

amc
  • 7,292
punger
  • 11

1 Answers1

0

Check out: My Ubuntu is running fsck on every bootup

Seems that there is a graphics related issue. If your PC has a built-in graphics, I think the 915 has a VGA port on it, then try to boot with that first.

There's some additional flags you can enable, but try that quick test and see what you get. If you can boot then you can start to look at the FX5200 as a possible source of the issues on boot.

Community
  • 1
Tony
  • 26