How to use sshpass?

Question

I need to use sshpass to launch a remote command through SSH from a Java code.

If I manually type in a console:

ssh -p 22 user@ipaddress mplayer '/media/data/myFavouriteSong.mp3'

works perfectly, but asks for password. So I tried running sshpass:

sshpass -p mypass ssh -p 22 user@ipaddress mplayer '/media/data/myFavouriteSong.mp3'
sshpass -p mypass ssh -l user@ipaddress mplayer '/media/data/myFavouriteSong.mp3'
sshpass -p mypass ssh -t user@ipaddress mplayer '/media/data/myFavouriteSong.mp3'
sshpass -p mypass ssh user@ipaddress echo 'OK'

and none of them work.

exhuma · Accepted Answer · 2018-10-02T14:16:30.590

This may be caused by the host-key checks done by ssh. It looks like sshpass keeps silent on invalid host keys (no output on neither stderr nor stdout) and exists with status-code 6. At the time of this writing, this was revision 50, and the matching constant in the code is RETURN_HOST_KEY_UNKNOWN, which hints to that error.

Your error-code may differ and looking at the code linked above may give you some insight.

If your issue is an invalid host-key you should think twice about overriding the error with a CLI option. Your machine could be compromised or you may be subject to a MITM attack! If you are 100% certain that this is not the case and if you have no means to keep the verified host-keys up-to date, you can use a command like this:

sshpass -pfoobar ssh -o StrictHostKeyChecking=no user@host command_to_run

score 11 · Answer 2 · edited Jan 08 '20 at 12:13

11

sshpass command works only if the password prompt ends in assword:.

If your password prompt is different you may have to adjust the source code of sshpass to recognize the prompt you have.

I have seen password prompts like Password for user@host: on some systems, maybe this is your problem.

edited Jan 08 '20 at 12:13

αғsнιη

36,350

answered Jul 14 '14 at 11:45

rjs

111

score 6 · Answer 3 · edited Oct 07 '18 at 08:26

6

I think you want something like:

sshpass -p yourpassword ssh user@ipaddress somecommand

For instance, this works for me:

sshpass -p mypassword ssh username@10.0.0.9 touch foo

edited Oct 07 '18 at 08:26

αғsнιη

36,350

answered Feb 07 '16 at 06:27

benofben

61

score 2 · Answer 4 · edited Jun 08 '15 at 12:14

2

make a key

ssh-keygen -t rsa
make a .ssh folder on the remote server it will ask for a password

ssh $USER@SEVERNAME mkdir -p .ssh
copy the key to the remote server

cat .ssh/id_rsa.pub | ssh $USER@SERVER 'cat >> .ssh/authorized_keys'

Check if it asks for a password, if not it should work.

ssh $USER@SEVERNAME 'command'

edited Jun 08 '15 at 12:14

Michele

904

answered Jun 08 '15 at 11:48

VeggieVampire

61

BeowulfNode42 · Answer 5 · 2014-05-15T06:26:34.343

sshpass syntax is

sshpass [-ffilename|-dnum|-ppassword|-e] [options] command arguments

Note that there is no space between the -p and the password.

Also I've noticed that you have to connect with ssh at least once manually to obtain the RSA key of the machine you are connecting to, to go into the ~/.ssh/known_hosts file before sshpass will allow you to connect.

so after obtaining the entry in the known_hosts file I can run a command such as

sshpass -ffilename_with_password_in_it ssh user@server uname -a

and it will execute the command uname -a on the remote server and output the results to the standard out on the local machine.

veysiertekin · Answer 6 · 2015-03-28T21:54:01.203

There is lots of way to do that, here is my suggested solution:

First of all, storing your password in a variable is give you more flexible commands. sshpass has an option for that:

-e: this option allows to read password from $SSHPASS environment variable

You have two way to set this variable:

Set directly in your code:
```
export SSHPASS='your_pass'
```

Or ask for it:

readPassword () {
  echo Ssh Password: 
  read -s SSHPASS
  eval "export SSHPASS='""$SSHPASS""'"
}

# read password

readPassword

Than execute your command;

If your command is static, run it directly:

sshpass -e ssh user@host << EOF
mplayer '/media/data/myFavouriteSong.mp3'
command2 parameter1 parameter2 parameter3 ...
command3 parameter1 parameter2 parameter3 ...
...
EOF

If your command will be dynamic use like this:

DYN_FILE_LOC='/media/data/myFavouriteSong.mp3'

eval 'sshpass -e ssh user@host << EOF
mplayer "$DYN_FILE_LOC"
command2 parameter1 parameter2 parameter3 ...
command3 parameter1 parameter2 parameter3 ...
...
EOF'

hope this helps someone.

score 1 · Answer 7 · answered Sep 28 '15 at 23:52

1

@exhuma had an example that lead to it working for me.

The password needs to be in form of -pPassword (without the space)

also quotes may be necessary: sshpass -p'Password&0' user@hostname

answered Sep 28 '15 at 23:52

user3367115

11

score 0 · Answer 8 · answered Sep 13 '21 at 11:47

0

The simplest usage is to set the SSHPASS variable:

read -p "SSH password:" SSHPASS
export SSHPASS

Then you can run e.g.:

sshpass -e ssh $user@$host echo Test

If something is going wrong, the -v flag will give you more information.

answered Sep 13 '21 at 11:47

mwfearnley

3,497

score 0 · Answer 9 · edited Jul 26 '13 at 16:06

0

sshpass uses pseudo terminals and the man page includes apologies for breaking occasionally. You can also try fd0ssh. It works if you do not need to send stdin to a process on the remote machine. That works if you just issue a command and capture the result.

edited Jul 26 '13 at 16:06

papukaija

2,425

answered Jul 26 '13 at 15:44

Bruce

649

score 0 · Answer 10 · answered May 26 '14 at 19:27

0

What you need is -f -t -t -t

sshpass -p$PASS ssh -f -t -t -t $USER@$HOST $COMMAND

Additionally you might have to remove "requiretty" from sudo config (/etc/sudoers) on the remote machine.

answered May 26 '14 at 19:27

Ehsan

226

How to use sshpass?

10 Answers10

Linked