Filmmaking Basics/3D Storyboard/Building a simple movie set inside FrameForge

To do storyboarding with FrameForge 3D Studio, you do not need a movie set.

However, a movie set looks nice and helps you get orientated.

You can download the movie set file at from the FrameForge community forum.

Or you can create your own. Here are optional instructions for people who want to create their own a movie set.

Using Room Builder, create a single wall which is 10 feet tall (3 meters) and 40 feet long (12 meters).

Drawing this exactly is difficult so use the numerical boxes to set the sizes.

Once you do this, you are finished. Press the Build Rooms button.

Click on the picture to see it full size.

Once you are in the main menu, select Artwork.

In Artwork, select the picture which has a frame.

Simply grab the picture and drag it to the movie set next to the wall.

The picture will sit on the ground so you will have to move it into place using the controls on the right when the picture is selected.

While the picture is selected, use the controls on the left side of the main window of FrameForge 3D Studio to raise (elevate) the picture to the proper height.

Using the control for scale, increase the size of the picture frame slightly so it looks about the correct size for a movie poster.

If you do not have the picture frame selected, it can be difficult to select. In that case, simply go to the menu for selecting items by name. Click in the check box for the picture. Highlighting alone does not work.

You can see what the picture looks like against the wall. Therefore, it is easy to adjust the size until it looks right.

The picture frame consists of two parts. The frame and the poster. You want to change the poster, not the frame.

Select the picture and then double click on the picture. You will get the "Green Room" window. There is no menu item for the "Green Room" which is annoying.

Be sure that you select the option "poster" and not "frame" which is the default.

When you want to modify textures in FrameForge 3D Studio, the new textures need to be in the correct folder.

Start by going to the folder for FrameForge 3D Studio and look for the folder called "Support".

Inside the support folder is the texture folder.

Rather than put the texture in the user folder (which I have not been able to get to work), put the picture in the decal folder. This is as good a place as any.

If you do not want to create your own Star Wars poster, you can use any of the completed storyboard frames.

Click on the picture to see the original.

Save the image to the decal folder as a PNG file.

When you have added the poster into the frame, it should look like this.

With the frame selected, create more posters just by duplicating them.

In the floor plan view (double click on the floor plan to activate the floor plan), drag the new frames to the correct locations.

You will probably want three or four posters on the wall.

Once you have duplicated the poster, you need to move it to the correct positon.

It is probably easier to drag the poster while looking at the floor plan.

When you have four posters, they should look like this.

With the wall selected, change its color.

Go to the set menu and change the floor color

All done.

You can change the floor color to the texture of fine grain granite.

You can add a sidewalk by using a building block which is sized at 6 inches by 2400 inches by 96 inches which has the texture of concrete.

You can make the wall any texture you wish.

You can use any poster you wish.

• Note: You can download this movie set file at from the FrameForge community forum and use whatever poster you wish.