Introduction
Tools
- 
                  
                  - 
            Power on the device, eject the disk tray, and power off the device. 
- 
            Turn the device over. 
- 
            Lightly apply downward pressure on the black covering on the disk tray until it comes off. 
 
- 
            
- 
                  
                  - 
            Turn the device around. 
- 
            Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image. 
- 
            Slide the side covers on either side towards the back of the device. 
 
- 
            
- 
                  
                  - 
            Turn the device so that the bottom is facing up. 
- 
            In the bottom, unclip the three plastic clips circled in red. 
- 
            On either side, unclip the plastic clip circled in red 
- 
            Slide the black covering forwards to remove. 
 
- 
            
- 
                  
                  - 
            Lift the Power Module up from the side. See picture. 
- 
            Pull up and away to remove the Power Module 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.