Introduction
Tools
- 
                  
                  - 
            I recommend wearing eye protection to avoid getting glass shards in the eyes. It is very important to heat the edges of the display well with a hair dryer/heat gun to loosen the double-sided adhesive and allow the insertion of a pry tool to open it. 
- 
            Insert the pry tool between the colored plastic edge and the glass (not between the plastic and aluminum edge) and begin to separate the display from the body. 
 
- 
            
- 
                  
                  - 
            Lift the display gradually along the edges 
- 
            Preferably, lift it from the bottom to the top to avoid damage to the flat cable and the connector 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble the device, follow these instructions in reverse order.