Safety Precautions

Written By: Sam Omiotek
  • Comments: 0
Safety Precautions

Difficulty

Very easy

Steps

4

Time Required

1 - 5 minutes

Introduction

Safety precautions to follow before conducting repairs on an EDCO KL-18 Concrete Saw model 39600-HD.

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

  1. jIcWdrvv4sFhphJE
    jIcWdrvv4sFhphJE
    oD41bEjoBIcL6ElR

    • Before you begin, ensure the machine is powered down and cool to the touch.

    • Chock the wheels to prevent the machine from moving while you are working on it.

  2. y6ew5ZoYKrCNJad1
    y6ew5ZoYKrCNJad1
    mvvkWdrD5QoymCGa
    2TTSbR1mFb2RTqtw

    • Flip the ignition switches on the motor and the handle bar into their "OFF" positions.

  3. Rm5CPsgK2SAGjSXN
    Rm5CPsgK2SAGjSXN
    t1eUVYlPIu4W2sOB

    • Flip the fuel cutoff valve switch into the off position.

  4. N2efYTH2SmlsZq3C
    N2efYTH2SmlsZq3C
    UKw6ARpdirV5RA5a

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Omiotek

Member since: 25/02/19

87403 Reputation

0 comments