Ridgid R82005 Housing Assembly Replacement

Written By: Alex Cominos
  • Comments: 0
Ridgid R82005 Housing Assembly Replacement

Difficulty

Moderate

Steps

4

Time Required

20 minutes

Introduction

A damaged housing assembly will impede the users ability to properly insert the battery and undermines the drills durability in harsh working environments. Switching out the drill’s housing assembly requires a Hex 2.0 Screwdriver to remove the seven M3 X 14mm screws.

  1. xvJJFuioskdVaGAE

    • Eject the battery from the drill.

    • Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

  2. U1qyAM2iBwuEyQQa

    • Push the metallic Housing Connecting clip out with flat side of the plastic opening tool.

    • Eject battery before attempting this step.

  3. DQ1VI5UxR22nCXRu
    DQ1VI5UxR22nCXRu
    xQ2Ok5BqM2ssGsj3

    • Remove the top half of the Housing Assembly.

  4. ipjSbu3TmZFJNdHU
    ipjSbu3TmZFJNdHU
    YWkuhHDkLVtOBZRo

    • Grasp carefully the top and bottom of drill components.

    • LED light needs to be manually removed.

    • Lift and transfer, as a whole, the drill components from the old housing assembly to the new housing.

    • Make sure all drill components fit properly in the grooves of new Housing Assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order. Also reinsert the battery to make sure the drill has power.

Author

Alex Cominos

Member since: 14/02/19

376 Reputation

0 comments