Introduction
Zipper pull replacement overview.
Make it easier to zip up your favorite jacket by replacing a missing zipper pull tab. It only takes a few minutes and afterward you’ll be able to grib your zipper pull with mittens or gloves.
For replacement parts or further assistance, contact Patagonia Customer Service.
-
-
Get your new zipper pull and position it with the pull-tab down.
-
Lift up the zipper, as if you were pulling the zipper closed.
-
-
-
Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.
-
Pull the zipper pull through the smaller hole.
-
-
-
Rest the zipper back in its normal, hanging position.
-
Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.
-
-
-
Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.
-
Bring the zipper pull-tab through the loop.
-
