Introduction
A simple, but effective and lasting DIY repair.
You'll need
-a small phillips screwdriver
-a thick guitar string. (I used a light gauge G) THIS WILL NOT WORK WITH PLAIN WIRE! Don't use anything bigger than a .8mm and no smaller than a .6mm string.
Tools
-
-
Create a very slight "U" curve 1/2" long, leaving 1/4" of straight wire on each side of the curve.
-
Be sure that the straight ends of the wire are in line with each other.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
