Introduction
This guide provides the steps to remove the back cover. This process is necessary to access many of the components inside.
Tools
- 
                  
                  - 
            Flip the device upside down with the handle facing away from you. 
- 
            Open the optical drive bay by sliding its latch to the right. 
- 
            Locate optical drive release mechanism on the bottom of the laptop. 
 
- 
            
- 
                  
                  - 
            Begin by turning the laptop upside down with the handle towards you. 
- 
            Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover. 
 
- 
            
- 
                  
                  - 
            Remove the panel and set it aside. 
- 
            Use a Phillips size 0 screwdriver to remove these 8 small screws. 
 
- 
            
- 
                  
                  - 
            Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive. 
 
- 
            
- 
                  
                  - 
            Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
One comment
thanks for this crucial tuatorial >