Netgear WGR614v9 Lower Case Replacement

Written By: Ryan Murphy
  • Comments: 0
Netgear WGR614v9 Lower Case Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

By removing the case you will be able to install a capacitor or an antenna.

  1. PUOm6cJT3t1UOAqv

    • Rotate the device so that the bottom is facing up.

  2. Pbx1oLZVUEDK1QO6
    Pbx1oLZVUEDK1QO6
    ub4YFSRPNfdyPsDi

    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

  3. IHhU4GXgYgoltmWJ
    IHhU4GXgYgoltmWJ
    xHiOMyBxtD3ok2of

    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

  4. OVfc6fhP31lWy4AP

    • Lift the bottom casing straight up from the router.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Murphy

Member since: 03/10/11

488 Reputation

0 comments