Introduction
Removing the motherboard is necessary if the motherboard itself or components of the motherboard need to be accessed or replaced.
Tools
-
-
Locate the single 1 cm screw on the back of the device (enclosed by a red circle in the image).
-
Using a screwdriver with a Torx 10 hex screw, begin removing the 1cm screw by turning the screwdriver counterclockwise.
-
Remove the screw and set aside.
-
-
-
Locate the two horizontal slots on the bottom of the device.
-
Insert the back end of the forceps into one of these slots. You may also use any other flat, narrow tool that fits into the slots.
-
Gently push the forceps into device. You should feel movement or hear a click, signifying this side of the device is unlocked.
-
Repeat with the other slot to completely unlock the device.
-
-
-
Grab the top and the bottom of the device and gently pull the device open.
-
Continue pulling until you have completely removed the top cover of the device.
-
-
-
After opening the router, grab the upper left corner of the sliver face plate and gently pull the motherboard out of the slot from within the case.
-
To replace the motherboard, follow these instructions in reverse order.
