Motorola Razr V3c Battery (CDMA) Replacement

Written By: krisko
  • Comments: 2
Motorola Razr V3c Battery (CDMA) Replacement

Difficulty

Very easy

Steps

2

Time Required

1 minute

Introduction

The purpose of this guide is to show how to install or replace a Motorola V3c battery.

  1. LsYKdNXvaQmcrGpg
    LsYKdNXvaQmcrGpg
    GN2C5FcbV156AXMJ
    dLyAYBRKKmCHONcJ

    • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

    • Lift and remove the rear panel away from the V3c.

    With the phone closed, press the silver button shown with a fingernail or such. Tilt and lift the battery cover and put aside.

    walltoall -

  2. Jvw5t42gRRgChDWm
    Jvw5t42gRRgChDWm
    NOieVuYp4564XPJD

    • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

    The Motorola V3 battery has a notch in one corner to ensure it can only go in one way. Fit the replacement battery by offering its bottom edge to the device, then tilt and click using thumb pressure.

    walltoall -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

krisko

Member since: 15/01/10

104 Reputation

0 comments