Milwaukee M12 2407-20 Outer Casing Replacement

Written By: Allison Schieber
  • Comments: 0
Milwaukee M12 2407-20 Outer Casing Replacement

Difficulty

Moderate

Steps

2

Time Required

30 minutes

Introduction

This guide will walk through the steps to remove the service housing set (outer casing) on the Milwaukee M12 2407-20.

  1. PqZcEKp3l34gYCTQ

    • Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

  2. ODF1exI6sgvUvCSs

    • Remove metal clip located at the base of the drill, where the battery is to be inserted.

    • You may need to use a spudger if the clip is too difficult to remove with your fingers.

Author

Allison Schieber

Member since: 05/02/19

677 Reputation

0 comments