MiTM Pressure Washer CM1400HDEC1 2017 Electrical Box Removal

Written By: Taylor Dixon
  • Comments: 0
MiTM Pressure Washer CM1400HDEC1 2017 Electrical Box Removal

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

This is a pre-req guide for the removal of the electrical box on the CM1400HDEC1 201 MiTM electric pressure washer.

  1. ULGTlE4Zhn4UHvLR

    • Remove the four 59.2 mm-long 4 mm hex socket bolts from the electrical box.

  2. pyaDEdBMXCMUbNvp
    pyaDEdBMXCMUbNvp
    tYtYSsfxuNhupjIW

    • Carefully pull the electrical box away from the engine until you have enough space to work inside it, making sure not to strain the cables that are still connected inside.

    • If you have trouble lowering the electrical box, you can disconnect the green power cord wire for more slack.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Taylor Dixon

Member since: 26/06/18

70371 Reputation

0 comments