Introduction

The Maylong MN-1000P is a lightweight laptop with a 10 inch screen. It is a very good starter laptop. It is an older laptop from 2013 and will require a lot of repairs through the the years. So if you notice that the bottom cover is broken then this guide can help you learn how the replace it. All you need is a screwdriver and you will be able to get the job done.

  1. EUqt4RYbg5RPeTr3
    • Place the netbook top down, with the opening of the netbook facing you.

  2. yxULNBHBpY3vBHPX
    • Remove the six 6mm Phillips #00 screws from the netbook.

  3. y3fuE1Hlf3VneHyr
    y3fuE1Hlf3VneHyr
    rkAZAu2FAQQNj3Bd
    2HieVGO21gBsPBHx
    • Remove the sticker in the middle of the netbook.

    • Remove the middle 6mm Phillips #00 screw.

  4. QVkMJMBv4B1hBJhB
    • Using two plastic opening tools, pry off the bottom of the netbook by going around the edges.

  5. BwS6XCkKLWQIBDCK
    • Remove the bottom of the netbook by lifting the corners.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Member since: 12/11/14

95317 Reputation

0 comments