Lenovo 500e Chromebook 2nd Gen Back Panel Replacement

Written By: Kristen Gismondi
  • Comments: 2
Lenovo 500e Chromebook 2nd Gen Back Panel Replacement

Difficulty

Easy

Steps

3

Time Required

10 minutes

Introduction

  1. SoeFw2LWLXtBAABl

    • Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.

    A Philips #1 might work better, less risk of stripping the screw head

    Fritz Borrelnootje -

  2. oy3KEAT4TpODtExE
    oy3KEAT4TpODtExE
    dVZaLXPWuDUANPqI

    • Remove stylus from the lower left corner of the back panel.

  3. nigtXIYFJFKZnqSZ
    nigtXIYFJFKZnqSZ
    Xsj3vgrPsvAt3Wkg

    • Go along the edge of the back panel with an iFixit opening tool until it pops loose.

    • Remove the back panel from the laptop.

    Where can you locate the write protect screw on this board?

    Nathalie Aigil -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

95317 Reputation

0 comments