LG G Pad 8.3 4G Speakers Replacement

Written By: Deja Morrow
  • Comments: 0
LG G Pad 8.3 4G Speakers Replacement

Difficulty

Easy

Steps

6

Time Required

5 minutes

Introduction

  1. OIGAVnaNdIkfiXgj

    • With the screen faced up, insert the metal spudger into the crevice so that it is sticking out between the side panel and the screen.

    • Be gentle when popping the panel off.

  2. mnThqgDwXnSmy6QN
    mnThqgDwXnSmy6QN
    N61JHAGxx5PKIFW6
    YQBbILgrPlje1grb

    • Take the spudger and slide it around the perimeter of the device.

    • Pull gently on the edges to get the panel to pop up.

    • If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.

  3. dbtaUP4CgSNmoDsA
    dbtaUP4CgSNmoDsA
    ctshMC2iVfUP1IkB

    • Remove the 4 1.5 mm screws holding the speakers in place.

  4. JocBQWFvCrDaRVWS
    JocBQWFvCrDaRVWS
    1KKgB3YjloQpi5MA
    Be4ECNDrOMPLcwSh

    • Put the spudger underneath the gold cap of the cable and lift to disconnect from device.

    • This cable can be damaged easily.

  5. DTZYePpcxAjSwOCq

    • Pull the cable back and out of the way of the speaker.

  6. bFyKCVJF1MLwJXw1
    bFyKCVJF1MLwJXw1
    U2T1QtSFwbdMXoI4

    • Place the spudger in between the speaker and the device to pop the speaker out of place.

    • Pull the speaker out of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Deja Morrow

Member since: 18/09/18

109 Reputation

0 comments