Insignia NS-DS9PDVD15 Disc Tray Replacement

Written By: Conner Kaer
  • Comments: 0
Insignia NS-DS9PDVD15 Disc Tray Replacement

Difficulty

Moderate

Steps

7

Time Required

7 minutes

Introduction

In this tutorial the user will be able to replace the disc tray on their Insignia NS-DS9PDVD15.

  1. dw3GIBSSOoW2TNlp
    dw3GIBSSOoW2TNlp
    pfP6CcMKbRFOTUoC

    • Turn the power off. Slide the power button to OFF.

  2. prQGRMGDw5doPbjW
    prQGRMGDw5doPbjW
    IOJ2KgMP22IoBKSQ

    • Unplug AC adapter from car cigarette lighter.

  3. KvjGTKOyvnhiShEL

    • Make sure there is no DVD or CD in the disc tray

  4. AbbJlwAxAyOpByLd
    AbbJlwAxAyOpByLd
    yOZF6CGYmrGltpoN

    • Unscrew the nine 9mm screws with a JIS #000 screwdriver.

  5. qyCIOMbvQBNIRpmc
    qyCIOMbvQBNIRpmc
    sGnLl2N4DsFasqVX
    vUGnfICiiRaevuoP

    • Pry off back panel with prying tool, then remove by hand.

  6. k4qwtSVU6uAqQrMF
    k4qwtSVU6uAqQrMF
    afYHwZAFbyEO3nhu

    • After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.

    • Unscrew them with the JIS #000 screwdriver.

  7. PZaNVh2ehADEaNw3

    • Slide the tray up and off of the hinge completely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Conner Kaer

Member since: 05/04/18

85 Reputation

0 comments