Introduction
From time to time, a cord stopper (in this case a double cord on a rain cover for a helmet) may come loose. Here we show you in a few steps how you can reattach a new cord stopper or reattach the existing one.
Tools
-
-
The cord stopper consists of 2 parts. The dividing line between the two parts is visually recognizable.
-
Use an opening tool to separate the two parts.
-
-
-
Insert both cord ends into the thick part.
-
Place the second small plastic piece between the two ends.
-
Now pull on the cord. The cord ends should automatically pull the small plastic part along with them
-
If necessary, close the gap at the end with a little pressure on the small plastic cap.
-
