Honeywell HY-204 Case Replacement

Written By: Nolan Ernotte
  • Comments: 0
Honeywell HY-204 Case Replacement

Difficulty

Moderate

Steps

2

Time Required

7 - 10 minutes

Introduction

Before you can fix anything inside of the Honeywell HY-204, you need to remove the case. Removing the case will require a bit of strength, but is pretty simple to do.

  1. nDZAsi3nLGqSO6oH
    nDZAsi3nLGqSO6oH
    EF2pENciU6pvCv2A

    • Before you begin, be sure to unplug the fan.

    • Remove the four 14 mm screws from the back of the device using the Phillips #0 Screwdriver.

  2. ZSHgxaWh3ZB3mxyn
    ZSHgxaWh3ZB3mxyn
    yAGOJE2ykBMMBMEL

    • Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nolan Ernotte

Member since: 14/10/14

384 Reputation

0 comments