Introduction
Tools
- 
                  
                  - 
            Insert an opening pick between the back cover and chassis, and pry around the perimeter until the back cover releases. 
- 
            Remove the back cover. 
 
- 
            
- 
                  
                  - 
            Remove the "void" sticker over the screw near the top-right of the battery, and the larger one near bottom of the battery. 
- 
            Use a Torx T5 screwdriver to remove the six screws. 
- 
            Use a Phillips #000 screwdriver to remove the two screws. 
 
- 
            
- 
                  
                  - 
            Use an ESD safe tool to carefully "walk" the battery connector out of its port. 
- 
            Use an opening tool to lift the battery up and out of its housing. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.