HP Elite x2 1012 G2 Prop Stand Replacement

Written By: kefil
  • Comments: 1
HP Elite x2 1012 G2 Prop Stand Replacement

Difficulty

Very easy

Steps

3

Time Required

5 minutes

Introduction

  1. LNRZiBGZKART5Gub
    LNRZiBGZKART5Gub
    QRtXxVQVnkxKTHXP

    • Lift the prop stand approximately 140 degrees from its home position to expose two T5 Torx head screws.

  2. RmriT6ACMJX1rDfN

    • Use the T5 Torx bit to remove both screws from the prop stand pivot points.

  3. DPuWB6Sp5UmURQl1

    • Gently pull the stand away from the device until you can lift the prop stand away from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

kefil

Member since: 06/04/19

106 Reputation

One comment

I broke my stand from where did i get my stand

Muhammad Moazam Saeed -