Introduction
Tools
Parts
- 
                  
                  
- 
            
Starting with the laptop on its back, remove the 13 screws holding the keyboard in place with a P00 screwdriver (2 screws are hidden behind the rubber footers)
 - 
            
Open the screen, revealing the keyboard. Using a prying tool, 'pop' the keyboard out by sliding the tool around the edge
 
 - 
            
 - 
                  
                  
- 
            
Gently raise the keyboard from the body, careful not to rip out the ribbons
 - 
            
With light pressure, flip the black bar holding the ribbons in place, and remove the ribbons from the body
 
 - 
            
 - 
                  
                  
- 
            
With a P00 Screwdriver, remove the 9 screws holding the battery in place
 - 
            
Gently pry the cable connecting the battery to the motherboard off
 - 
            
Battery will lift away from the body (screen will now be heavier than the body, be careful not to drop it)
 
 - 
            
 - 
                  
                  
- 
            
Gently disconnect the cable connecting the internal speaker to the motherboard
 - 
            
Using a P00 Screwdriver, remove the final screw from the left speaker
 - 
            
Using a prying tool, carefully remove the speaker out of the body
 
 - 
            
 - 
                  
                  
- 
            
With a P00 Screwdriver, remove the final screw from the right speaker
 - 
            
Carefully remove the right internal speaker from the body
 - 
            
The entire speaker (barring some tape you may need to remove) should lift away from the body of the laptop
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.