Introduction
This device can be identified utilizing the criterion on the device page. When replacing the screen, be sure to set aside the following tools: T5 Torx screwdriver and plastic opening tool.
Tools
- 
                  
                  - 
            Once the screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing. 
 
- 
            
- 
                  
                  - 
            Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect. 
 
- 
            
- 
                  
                  - 
            Use a plastic opening tool to loosen the three clips located on the top of the screen encasing to a position that loosens the hold on the screen. 
 
- 
            
- 
                  
                  - 
            Use a plastic opening tool to loosen the two clips on the short sides of the Nuvi screen encasing to a position that allows the removal of the screen. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.