Fujitsu Lifebook S6120 Hinge Cover Replacement

Written By: Jaimie Nakamura
  • Comments: 0
Fujitsu Lifebook S6120 Hinge Cover Replacement

Difficulty

Easy

Steps

5

Time Required

5 minutes

Introduction

If the power button, wireless switch, or volume toggle is unresponsive you may have to take off the hinge cover.

  1. slTsnYQyCQJKH4IG
    slTsnYQyCQJKH4IG
    nawwlcQFCQmJUuxv
    SpWAPvgTJBF2jyPP

    • To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

    • Push the two tabs in towards the laptop.

    • Lift the battery up and out from the frame of the laptop.

  2. KPNW6T6phQiNrPSF
    KPNW6T6phQiNrPSF
    lMQodQPCPSR2BdMc

    • Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

  3. vivHNIGL1HEvqtpY

    • Lift the hinge cover.

    • The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

  4. WB3MeM5kKCtUtuel
    WB3MeM5kKCtUtuel
    OYDSyT5MDELvMnSq
    DsYVQDkI2SGWpQYf

    • Use the tweezers to disconnect the ribbon cable from the motherboard.

  5. 4vUNKHemsGEfY1F2
    4vUNKHemsGEfY1F2
    sM1FiSh3fa4EeOJn
    b2R5sxeONgdbWnwb

    • With the tweezers detach hinge cover cables from the motherboard.

    • Remove hinge cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jaimie Nakamura

Member since: 20/03/18

229 Reputation

0 comments