Framework Laptop 12 Safety

Written By: Arthur Shi
  • Comments: 0
Framework Laptop 12 Safety

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

Initial safety prerequisite step. Unplug the laptop and shut it off.

  1. ENj2nRYJffBN2QaN
    ENj2nRYJffBN2QaN
    YjlDgdAsDVIlgqUJ
    GRNSY6XxqDVbUVQJ

    • Before you begin repairs, unplug your laptop and shut it down from the operating system. This ensures that the laptop isn't in standby/suspend mode.

    • The indicator LEDs along the edges should be unlit. The laptop should be silent.

    • If you accidentally turn on the laptop during repair, hold the power button down for 10 seconds to shut it down.

    • Make sure your Framework Screwdriver has the T5 Torx bit (labeled as T-5) facing outwards. If it's not, pull the bit out and flip it.

Author

Arthur Shi

Member since: 03/01/18

296850 Reputation

0 comments