Introduction

Memory module/RAM removal prereq guide

  1. ENj2nRYJffBN2QaN
    ENj2nRYJffBN2QaN
    YjlDgdAsDVIlgqUJ
    GRNSY6XxqDVbUVQJ
    • Before you begin repairs, unplug your laptop and shut it down from the operating system. This ensures that the laptop isn't in standby/suspend mode.

    • The indicator LEDs along the edges should be unlit. The laptop should be silent.

    • If you accidentally turn on the laptop during repair, hold the power button down for 10 seconds to shut it down.

    • Make sure your Framework Screwdriver has the T5 Torx bit (labeled as T-5) facing outwards. If it's not, pull the bit out and flip it.

  2. ubIRwnfForMuSctD
    • Set your Framework Laptop face-down on a clean work surface.

  3. uSiaYQJxHWQEtBTp
    uSiaYQJxHWQEtBTp
    4PYD5BWmLBijnqFr
    • Use your Framework Screwdriver to fully loosen the eight captive T5 Torx screws on the bottom of your laptop.

    • Most screws in your Framework Laptop (including these) are captive—they're designed to stay in place after you loosen them.

    • Your laptop comes with a spare set of screws in the frame above the battery. Be careful—the replacement screws aren't captive.

  4. UomOMxHFjJlXOmVI
    • Flip your laptop over so it's face-up on your work surface.

  5. BAlEsafUboQ4NySF
    BAlEsafUboQ4NySF
    IOc5J3IPRwcuJcrW
    • Open the laptop lid so that both the screen and the base lie flat on your work surface.

  6. 1rUg25vLV4eVwDT1
    1rUg25vLV4eVwDT1
    PI4YlkgvqAGikOsI
    P4UYnHUqKXiVjnPu
    • Use your fingers to grip the Input Cover in the hinge cutouts.

    • Lift upwards to swing the Input Cover up from the base of the laptop.

    • There are magnets holding the Input Cover down, so you'll feel some resistance. If it feels like a lot of force is required, check that you've fully loosened all the screws on the bottom of your laptop.

    • Remove the Input Cover.

  7. KAOWWMONMeDSxtex
    KAOWWMONMeDSxtex
    vlKJhDm1v6nB6Luo
    • Use your fingers to flip open the memory flap.

  8. Edoj1MZOatkp4rGp
    Edoj1MZOatkp4rGp
    xgYWgMAhEGG4RxdO
    • Use your fingers to spread the clips on both sides of the memory module apart to unclip the memory.

    • The memory module will pop up to an angle when it's unclipped.

  9. w6OkPxg33R3KsEH3
    w6OkPxg33R3KsEH3
    bAUSgrnLNxJPZlOO
    • Use your fingers to grab the memory module by its edges.

    • Slide the memory module out of its socket and remove it.

Arthur Shi

Member since: 03/01/18

296850 Reputation

0 comments