FirsTime Wall Clock Movemement Mechanism Replacement

Using a Phillips #1 screwdriver, remove all four screws on the back of the clock.

Once screws are removed, simply remove the glass lens covering the display of the clock by lifting it with your hands.

Turn the display face up.

Use needle nose pliers to pull off the 'second' hand.

Use needle nose pliers to remove the 'minute' hand.

Then use needle nose pliers to remove the 'hour' hand.

Once all hands are removed, use a 7/16-inch wrench to unscrew, in counter clockwise direction, the threaded nut in the center of the clock.

Removing the threaded nut is what allows the movement mechanism to be removed from the clock.

Lift the washer underneath the nut with your fingers.

Now you may remove the display of the clock from your malfunctioning movement mechanism.