Introduction
Tools
- 
                  
                  - 
            Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles. 
- 
            Unscrew the 2 4 mm Phillips head screws by the battery. 
 
- 
            
- 
                  
                  - 
            Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop. 
- 
            Now you can fully remove the keyboard from the laptop. 
 
- 
            
- 
                  
                  - 
            Place your fingers or a spudger between the front panel and the rest of the laptop. 
- 
            Pull upwards gently to detach the side you are grabbing. 
- 
            Repeat on the other side until the panel easily peels off the laptop. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.