Introduction
This guide shows how to remove and replace a worn battery for the Dell Precision M3800 laptop.
For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.
Tools
Parts
- 
                  
                  - 
            Use a T5 Torx screwdriver to unscrew the ten 3mm screws on the laptop back cover. 
- 
            Lift up the silver cover from the back panel to reveal two screws. 
- 
            Use a Phillips screwdriver to remove the two screws underneath the silver cover. 
 
- 
            
- 
                  
                  - 
            Use an opening tool to pry around the edges of the back panel to loosen the panel. 
- 
            Remove the back panel. 
 
- 
            
- 
                  
                  - 
            Disconnect the battery cable from the system board [1]. 
- 
            Use a Phillips screwdriver to remove the four screws securing the battery to the laptop. 
- 
            Lift the battery off the computer [2]. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
there are 2 additional screws under the metal plate
Andrew Gaquin -
That's right, at first time I tried carefully remove the back plate , with no success, {nly few minutes later I realized it were these 2 screws holding it all together and fighting against my intrusive dids
Alexander Fediushyn -
Thanks for the tip! I corrected the step to include this.
Arthur Shi -