Introduction
Tools
- 
                  
                  - 
            Using a plastic scribe, pry the edges of keyboard trim to release it from the computer 
- 
            Lift up to remove the keyboard trim from the computer. 
 
- 
            
- 
                  
                  - 
            Lift the battery bay that secures the keyboard to the computer 
- 
            Lift the latch that secure the keyboard cable to the computer 
- 
            Disconnect the keyboard cable the computer 
 
- 
            
- 
                  
                  - 
            Remove the screws that secure the SSD card to the computer 
- 
            Lift and remove the SSD card from the computer 
 
- 
            
- 
                  
                  - 
            Remove the screws that secure the palmrest assembly and flip the computer. 
- 
            Perform the following steps as shown in the illustration: a. Lift the latch that secures the keyboard and touch cable to the computer [1]. b. Disconnect the keyboard and touch cable to the computer [2]. c. Remove the screws that secure the palmrest assembly to the computer [3]. 
- 
            Perform the following steps as shown in the illustration: a. Pry the edges of the palmrest assembly [1]. b. Lift the palmrest assembly from the computer [2]. 
 
- 
            
- 
                  
                  - 
            Perform the following steps as shown in the illustration: a. Disconnect the coin-cell cable from the computer [1]. b. Lift the coin-cell battery from the computer [2] 
- 
            Installing the Coin-Cell Battery 1. Place the Coin-cell battery on the computer. 2. Connect the coin-cell battery cable to the computer 
 
- 
            
To reassemble your device, follow these instructions in reverse order.