Introduction
Removing the back cover is a fundamental step for cleaning, replacing, or repairing many other components inside the laptop. That’s why this will serve as a pre-requisite task for most of the replacement guides of the Dell Inspiron 15-5567. You will only need a Philips #0 screwdriver and the blue plastic opening tool to complete this guide.
-
-
Orient the laptop with the back cover facing upward and the INSPIRON engraving reads legible (not flipped).
-
Remove 13 M2.5x8mm screws using a Philips #0 screwdriver.
-
Remove two M2x4mm screws using the same screwdriver.
-
-
-
Insert the blue plastic opening tool into the crease of the CD driver, and pop it open.
-
Slide the rest of it out with your hand.
-
-
-
Remove three M2x2mm screws underneath the CD driver with the same Philips #0 screwdriver.
-
Place the blue plastic opening tool in the crease of the cover and push it upward to open the back cover.
-
Grab the corners of the cover firmly and lift it up.
-
To reassemble your device, follow these instructions in reverse order.
