Introduction
In this guide, we will show you how to remove and replace the Rear-I/O Cover.
Tools
- 
                  
                  
- 
            
Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.
 
 - 
            
 - 
                  
                  
- 
            
Slide the tabs on the NEW base cover into the slots on the computer base and snap the base cover into place
 
 - 
            
 - 
                  
                  
- 
            
Using a plastic scribe, gently release the tabs that secure rear-I/O cover to the computer base.
 
 - 
            
 - 
                  
                  
- 
            
Slide the NEW rear-I/O cover into the slots on the computer base and snap the rear-I/O cover into place.
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.