Introduction
This tutorial will show you how to prepare your DJI Mavic Mini drone for flight and connect it to the remote control.
Have fun!
- 
                  
                  - 
            Turn the rotor blades towards the battery compartment. 
- 
            Grasp the cover tab with one finger, gently push it towards the camera and remove the cover. 
 
- 
            
- 
                  
                  - 
            Hold the drone with one hand and unfold the rotor arm with the other. 
- 
            Repeat the process on the other side. 
 
- 
            
- 
                  
                  - 
            Turn the drone onto its back. 
- 
            Fold out the rotor arm in an arc towards the battery compartment. 
- 
            Repeat the process for the other rotor arm. 
 
- 
            
- 
                  
                  - 
            Unfold the phone holder. 
- 
            Take the joysticks out of the holder and screw them in, in a clockwise direction. 
 
- 
            
- 
                  
                  - 
            Stecke dein Handy in die Halterung und verbinde es per Kabel mit der Fernbedienung.Put your phone in the cradle and connect it to the remote control via cable. 
- 
            Press the On button once briefly, release it, and then press and hold until you hear a "beep" sound. 
 
- 
            
- 
                  
                  - 
            Press the button on the bottom once briefly, let go, and then hold it down until you hear a "beep". (similar to the remote control). 
- 
            Place the drone on a straight surface where it can take off. 
 
- 
            
- 
                  
                  - 
            With both devices turned on, open the "DJI Fly" app on your phone and wait for your drone to connect, you can tell because the app will show you a live image of your Drone. 
- 
            Now when the drone is connected to the remote control, you can make it go up by pressing the "start" button in the app. 
- 
            Have fun flying! 
 
- 
            
Work through the steps in reverse order to repack your drone.