Blackberry RIM 7250 Back Housing Replacement

Written By: Noah Eckert
  • Comments: 1
Blackberry RIM 7250 Back Housing Replacement

Difficulty

Easy

Steps

7

Time Required

2 minutes

Introduction

This guide will be useful in replacing the back housing for the Blackberry RIM 7250. For this guide, you will need a plastic opening tool and a Torx #6 screwdriver head.

  1. qjHaIrXQpfCTXgTi
    qjHaIrXQpfCTXgTi
    AGyWJEuo4OloQyQo
    3EgAKqbp2D2LTIZ4

    • Push the release button down and away from the device.

    • Slide the cover off toward the bottom of the device, revealing the battery compartment.

  2. LOq3yCW4xCtSewjL
    LOq3yCW4xCtSewjL
    12yRLvUkvEkhYCHU
    CiuqtSQhmiZkR1IT

    • Place your finger in the groove next to the battery.

    • Lift your finger up to eject the battery from the battery compartment.

  3. 5eG2gwgKnUFwL4fQ
    5eG2gwgKnUFwL4fQ
    KHPXG5csHxocjZD5
    mZtibUIJVBolRDMx

    • Remove the battery from the compartment.

  4. l1jLQObp2CRQaicU
    l1jLQObp2CRQaicU
    65vL4keGwONtgJsW

    • Remove the four 10.7 mm Torx T6 screws.

  5. Qk3QsFBHf3vgX6b3
    Qk3QsFBHf3vgX6b3
    MQj3djfDuEGSsyPD

    • Remove the two 5 mm Torx T6 screws.

  6. RbHgrBqpSlqBDHhv

    • Hold the phone with one hand, with the bottom facing toward you.

    • For both clips, insert the plastic opening tool and push away from you.

    • You will hear a clicking sound for each clip that is released.

  7. GTDHOjkVC43QRQY5
    GTDHOjkVC43QRQY5
    1uaefIrYuIIYYQCS
    XyLwEBmTBRkvTVbO

    • Grab the back housing from the bottom and lift the housing away from you.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Noah Eckert

Member since: 05/11/18

519 Reputation

One comment

Great Guide!

Suketu Patel -