Introduction
If some or all of your keys are not working, you may need to place your laptop's keyboard. This guide will help you through this process.
Tools
- 
                  
                  - 
            Flip the laptop over and locate the battery release switch. 
- 
            Insert the pointed end of the spudger into the battery release switch. 
- 
            Push the battery release switch to the right. 
 
- 
            
- 
                  
                  - 
            While the battery release switch is pushed to the right, carefully slide the battery out of its socket. 
 
- 
            
- 
                  
                  - 
            Flip the keyboard cover upside down. 
- 
            Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel. 
 
- 
            
- 
                  
                  - 
            Push the metal panel forward to unlock it from plastic holders on both sides. 
- 
            Lift the metal panel up and peel it back to expose the keyboard component. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.