Introduction
Tools
- 
                  
                  - 
            "Unlock" your battery by moving the switch as shown so that an unlocked lock on a red background is shown. 
 
- 
            
- 
                  
                  - 
            Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop. 
 
- 
            
- 
                  
                  - 
            Unscrew both of the screws that are holding the back panel in place with the Philips #00 head. 
 
- 
            
- 
                  
                  - 
            Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there. 
 
- 
            
- 
                  
                  - 
            After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.